I'm on the road from July 12th to August 17th.
No physical item orders will be shipped until I return on August 18th.
Digital products will still be emailed during this time
-Louie Foxx Dismiss
My current reading is Ken Weber’s book Maximum Entertainment 2.0. This is the expanded version of the original book. It’s something every magician should have. It’ll make you think about your show, and hopefully make some changes. In one part of the book Ken writes about performers saying “ummm…” and how it’s a bad thing. … Continue reading “Ummmm….”
My current reading is Ken Weber’s book Maximum Entertainment 2.0. This is the expanded version of the original book. It’s something every magician should have. It’ll make you think about your show, and hopefully make some changes.
In one part of the book Ken writes about performers saying “ummm…” and how it’s a bad thing. I’ve been hyper aware of it, and a ton of performers say it a lot! I went back and reviewed some video and I say it a lot in my newer routines. I need to go back and work on my learning my scripts
Go watch video of yourself performing and listen for the “Ummms“, I was really surprised when I heard them!
With a magic trick, all of the little things matter and they matter a lot! There’s a trick that I do in the show that when I started doing it, it used three thumb thumb tips. At one point I had to remove something from one of them, and put it into a different thumb … Continue reading “Little Things…”
With a magic trick, all of the little things matter and they matter a lot! There’s a trick that I do in the show that when I started doing it, it used three thumb thumb tips. At one point I had to remove something from one of them, and put it into a different thumb tip!
After really thinking about how the trick flowed, I managed to figure out a way to do it with only two thumb tips. One of the tips is a XXL thumb tip, and that solved the the problem of having to move something from one thumb tip to another, and it also meant one less time that I need to go to the bin on my table.
The next problem was prop management. On my table, there’s a bin. In that bin are my props, and the thumb tips used to just lay on the bottom of the bin. The problem is that they roll around, especially if my table is carried out, and not preset. I solved this by 3D printing this holder:
The foot on the holder is to provide a more steady base, so that it can’t tip over. Hopefully the thumb tips will stay upright!
There are certain “plots” in card magic that I’m really not a fan of. One of them is the Do As I Do type of tricks. These are typically very procedure heavy and the payoff isn’t that great. Usually it ends with you and a spectator finding the other person’s card. Last night I was … Continue reading “Do As I Do…”
There are certain “plots” in card magic that I’m really not a fan of. One of them is the Do As I Do type of tricks. These are typically very procedure heavy and the payoff isn’t that great. Usually it ends with you and a spectator finding the other person’s card.
What makes this Do As I Do trick great is that it’s not a “pick a card” type trick. It’s a color change type of card trick, but the cards change for both you and the spectator! Best of all there’s no procedure! The top cards on both halves of the deck keep changing, it’s great!
I love encountering tricks that change how I feel about magic plots!
Making the tricks that I currently do play bigger is something I’m always working on. There are a lot of ways to do this, however one challenge has always been card tricks. I don’t do a lot of them in the show, but those that I do are generally limited to poker sized cards. One … Continue reading “Playing Bigger…”
Making the tricks that I currently do play bigger is something I’m always working on. There are a lot of ways to do this, however one challenge has always been card tricks. I don’t do a lot of them in the show, but those that I do are generally limited to poker sized cards.
One trick that I do uses cards in a holder on a pole. This is one of the rare instances where I can use jumbo cards, but haven’t. Last night I 3D printed out a new holder for the trick that will take jumbo cards.
My concern is that the pole won’t be able to hold the larger cards. When the cards on the end, the weight will make the pole bend. I do have a shorter pole than I normally use, and that would help with the bending a little bit.
Larger cards will help solve the problem of cards being visible from a distance.
There are many magic props that are a pain to use. Mostly because of either they wear our or need to be maintained. For example, you may have a prop that has a flimsy hinge or a string that rubs against something. Those are things that you need to keep an eye on. On thing … Continue reading “Magic Prop Problems…”
There are many magic props that are a pain to use. Mostly because of either they wear our or need to be maintained. For example, you may have a prop that has a flimsy hinge or a string that rubs against something. Those are things that you need to keep an eye on.
On thing that I use in my show is a remote control to run my audio. I’ve heard stories of people breaking the belt clip on it. While not a huge deal, it’s a pain the butt to not have one while you are waiting for a replacement to arrive, or trying to figure out how to make a makeshift belt clip.
I was working on another prop and had some leftover silicone, so I made a mold of the remote control’s belt clip and made a couple belt clips.
These fit perfectly onto the remote control. The are going to live in the bottom of my audio case for when I need them, or am working with with someone cool who might need one.
The Vanishing Bird Cage is one of the hardest tricks I’ve ever worked on. It seems like every problem I solve, another problem pops up. In the recent past when I did the cage, the plan wasn’t for it to stay in the show for very long. Because of this, I didn’t put a ton … Continue reading “”
The Vanishing Bird Cage is one of the hardest tricks I’ve ever worked on. It seems like every problem I solve, another problem pops up. In the recent past when I did the cage, the plan wasn’t for it to stay in the show for very long. Because of this, I didn’t put a ton of time into it.
Now that I think this is something that’s going to be in the show for a little while, I’m putting more time into it. I want to do the vanish of the bird cage faster than the “slow motion” vanish. I’m having a frequent problem with the cage hanging up on my sleeve at the exact same spot. I think it has to do with the coat more than the cage. Material seems to bunch about 3 inches inside my sleeve and the cage gets stuck about 20% of the time.
My solution was to have it not run up the sleeve. I’m having it run across my hand. This gives me a more unusual grip of the cage, the cage sits on the palm of my hand. It’s similar to the one handed grip that John Carney uses in the CARNEY 2013 video on the Vanishing Bird Cage.
The main difference Carney’s grip and mine is that my hand is completely palm up. The cage can be displayed with no support from either hand, aside from my right palm as a base.
Adjusting my grip has reduced the cage hanging up to less than 5%. This is good, but still a long way to go!
Honestly, I’m not sure how I used to do the vanishing birdcage. I think I was very lucky in that years ago it never really hung up on my sleeve in a show. I also think that I’m currently more aware of failure without an “out” in tricks that I do in the show. Billy … Continue reading “No Outs and Snagging…”
Honestly, I’m not sure how I used to do the vanishing birdcage. I think I was very lucky in that years ago it never really hung up on my sleeve in a show. I also think that I’m currently more aware of failure without an “out” in tricks that I do in the show. Billy McComb in an interview on the Greater Magic Video Series says, “…there is no out when the cage is hanging out of your sleeve.“
Currently I’m following Tommy Wonder‘s advice. Every time the cage snags on something, I’m trying to figure why it snagged and what I can do to stop it from snagging. It’s a smart approach, and one that’s a lot of work and will end up with a fairly altered jacket.
About a month ago I wrote about getting bonus tricks out of the tricks you are already doing (you can read the post here). These are little things that frequently happen and when they do, you can take advantage of them. The example I used was having a card selected, top change it, and have … Continue reading “Another Bonus Trick…”
About a month ago I wrote about getting bonus tricks out of the tricks you are already doing (you can read the post here). These are little things that frequently happen and when they do, you can take advantage of them. The example I used was having a card selected, top change it, and have it signed. Most people don’t process that the card has changed, and they remember signing the card they picked, not that the one the one you switched it for.
Using this an idea that was inspired by a trick in the book Be More Funny by Christopher Barnes, I came up with this trick. Someone picks a card (5 of spades) and signs it. You could do a quick ambitious card sequence, then have a card selected from another deck. You say both cards will match, but they don’t, the second card is the 4 of spades. You rip out the middle spade of the 5 of spades to turn it into the 4 of spades. The audience is then amazed that the signed 5 of spades actually turns into a 4 of spades (still signed)
So how do we do this?
I have two methods. The first is simply to top change the card. The second is to use a gimmicked card, this card would be a five of spades, but the corners show the four of spades:
The gimmicked card is better if you want to do a trick with the card before you rip out the center pip and it will reinforce the idea that the card is still a 5 for a lot longer. You’ll have a hard time passing of a 4 as a 5 if they keep seeing the face.
I’m going to try to make up a few gimmicked cards this week and try them out!
One of the best books I’ve read about comedy magic (i’m still reading it) is Be More Funny by Christopher Barnes. This book is a solid book on techniques to create comedy magic, and probably the best that breaks it down into different types of comedy. His examples of the routines to illustrate the comedy … Continue reading “Fantastic Book!”
One of the best books I’ve read about comedy magic (i’m still reading it) is Be More Funny by Christopher Barnes. This book is a solid book on techniques to create comedy magic, and probably the best that breaks it down into different types of comedy.
His examples of the routines to illustrate the comedy principles are great and all of the tricks are unique. He doesn’t just take a basic trick and make it funny, he builds a whole unique routine. He’s not just doing funny patter with Hippity Hop Rabbits, but creating an original ride to take the audience on in each trick.
While reading this book I came up with the idea of a card trick with crackers. The trick is coming along, it still has a way to go. I can’t think of the last time I read a magic book and ended up with a unique routine out of it. Honestly, I think this book is one of the best $50 you can spend on a magic book. I think that even if you aren’t a comedy magician you’ll learn something out of it because it teaches you how to create your own routines, not just make existing ones funnier!
There are magic tricks that I’ve always been fascinated by and wanted to do in my show. Over the years some of these tricks have been in a version of my show and having done them, I don’t need to do them again. There are other tricks that I keep revisiting, trying to find a … Continue reading “Another Idea Becomes Reality…”
There are magic tricks that I’ve always been fascinated by and wanted to do in my show. Over the years some of these tricks have been in a version of my show and having done them, I don’t need to do them again. There are other tricks that I keep revisiting, trying to find a way to make them work for me. One of those tricks is Coin in Ball of Yarn.
The basic effect is that a borrowed or marked item disappears and reappears inside of a ball of yarn. There are a lot of ways to do this effect, and a lot of ways to present it. Usually the method dictates whether the ball of yarn can be shown before the trick has started or not, which will affect how the trick is presented.
Years ago I was working on an Object in Ball of Yarn and wanted a fishing pole for the person to be able to reel in the yarn. Unfortunately commercially made fishing pole reels aren’t designed to handle yarn. A fly fishing reel almost works, but they are too small to hold a meaningful quantity of yarn. I hand built a contraption on a vintage hand drill that reeled in yarn, but was super heavy, hard to work (for someone in the audience) and ugly as heck.
About a month ago I started working on a new version of Object in Ball of Yarn and a friend of mine suggested that I use a fishing pole. I told him that they don’t work for yarn. He suggested I make one using old movie film reels. Then it hit me, I have a 3D Printer, why not just print it out and it will be exactly how I want it to be. Here’s what I printed out yesterday:
It finished printing out last night and I tried it out this morning and I’m happy to report it works great! The nice thing is that the fishing pole is made from a “travel fishing pole”, so it collapses and easily fits in my luggage. Another prop that I have for this trick is bowl to hold the yarn, and this bowl has a fitting on it to screw into a mic stand. Between the fishing pole that collapses and not having to travel with a stand for the bowl, this is becoming a pack medium, play big routine!
