Over the summer I did something in a show I regretted. I was performing at a fair and there was a kid that kept coming to the show and was being a distraction. I can handle the 4H kids that come to the show everyday, but this kid would walk up to the front of the stage and block the audience and say things to me. Not things that were remotely relevant, but like, “use my pen” as he tried to hand me one of the novelty shocking pens that a booth at the fair was selling.
After numerous times telling him to “No” and to step away from the stage, it was being a huge distraction for the audiences over multiple shows. One show I took the clock that I use for a trick out of my case as asked him if he could read a clock like this. He said “yes”, and I asked him what time it showed. He told me and I said, “No, it’s time to sit down and shut up”! It got a huge laugh, and worked, the kid sat down and didn’t talk the rest of the show.
The laugh told me that the audience was on my side, but I didn’t feel good about it. The laugh didn’t move the show forward, sure it eliminated a speed bump. On stage that’s not my character, sure I’m edgy and snarky, but not mean. I honestly felt bad about it. However the kid showed up to my shows the rest of the week and sat through them quietly and enjoyed them.
I’m sure there would be a better way to get the kid to behave and in the moment I had to make a choice. I’m not sure what I would do in the future. If I waited till after the show and talked to the kid, the whole audience suffers for that show. The kid was making the show unwatchable.
Maybe that was the only solution? I don’t know. I still feel bad.
-Louie
Category: magic show tips
3d Printing Vintage Magic Parts!
A couple of months ago I got a Leon’s Improved Glass Penetration by Merv Taylor.
It appears it should have a dozen spikes, plus two hooked spikes, and mine only came with six. Five regular spikes and one of the hooked spikes. These are something that was custom made for the trick, so it’s not something I can just go to the hardware store and buy.
This is where my 3D printer comes in handy. I designed a replica of the spike and printed it out!
The test one came out great, now my next step it to print out a full set of them! I do still need to try to create the hooked spike. I’d like the set to match.
-Louie
Late Season Library Shows
Last week I did a run of library shows for an area where the kids were off school for conferences. Here’s my 50 minute show in 64 seconds:
@louiefoxx What a Magic Show at a library looks like! #magicshow #library #magician #wallawalla #LouieFoxx #magic #sizzlereel ♬ original sound – Louie Foxx
My whole library shows (aside from the nest of boxes and speaker) fits inside of a “carry on” sized case. For me a pack small show is something that just happened, not a requirement. While it’s nice that the show fits in a small case, I don’t mind travelling with a larger one.
I’ve mentioned it before, but I think the key to a show that packs small is using props that give you show visual textures. The idea is to not have a show that looks like everything was selected because its flat or small. A couple of good example of things that I do that take up little space, but are visually large are the troublewit and the lasso. Both of them when I do the routine take up a lot of psychical space in the performing area.
If one of your goals is a suitcase show or a packs small show, try to avoid everything being a flat card. I’ve seen many suitcase shows where it looks like everything was selected because it was flat!
-Louie
Vintage Magic Trick: Blaisdell’s SKP
This vintage magic trick is Blaisdell’s S-K-P, and I can’t find any reference to it online. Here’s what it looks like:
@louiefoxx What were you thinking? #magictrick #rubberband #vintage #whatwereyouthinking #magic #rubberband #louiefoxx #vintagemagictrick ♬ original sound – Louie Foxx
The problem with the trick is there’s soo many props and soo much process to make a rubber band go through a shoelace. There had to be ring on string techniques that could accomplish the same effect in a much clearer manner. One of the challenges of the trick is the audience needs to understand how the line segments that the rubber band make work. If they don’t understand that, the trick will fall flat.
I will say the move that accomplishes the trick is kinda interesting, but not enough to put out a physical trick. I think this trick would be a good magazine item, but not a full release.
-Louie
Production Totes
When making deliveries, Amazon uses these totes to haul packages:
I don’t know if they’re common enough for people to recognize what they are. They collapse flat and I think they could be converted to a magic prop. It wouldn’t be hard to make one into a tip over trunk. You would also simply put a panel that flips up on the bottom and put it on a mirror base and you’re good to go.
The challenge is that I don’t think they’re quite super common knowledge like a milk crate was. Maybe in a couple of years…
-Louie
Finished Ginosko!
I finally finished reading Ginosko. This is a fantastic magic book, what I like about it is that it’s not just tricks. The whole back half is advice from other magicians and people in David’s life.
For me the routine from the book that’s worth the price of the book is “Asking the 8 Ball”. It’s a transposition of a selected card with the 8 of the same suit. One of the things that makes this great is how the end of the trick where the actual transposition happens, the audience kinda figures it out on their own. What I mean by that is when we get to the point where I reveal the selected card isn’t where it should be, the audience member automatically reaches down and reveals the transposition with any guidance from me.
It’s really a great moment.
There’s tons of other great material and advice in it. There’s a fun vanishing bottle routine in it, I won’t do the routine, but got me thinking about an idea for the vanishing bottle. The book helping me make a connection to something else is always valuable to me!
Another trick that hits really hard is “Post-it Crane”. This is a cool trick, but I don’t think it’ll really ever end up in my main close up magic set because I don’t have the pocket space for a post it pad and the “gimmick”. When I have done it, it’s been for small groups of about 4 people and it absolutely amazes!
This book is cheap at like $25 and totally worth picking up! I got mine at Misdirections Magic Shop.
-Louie
Vanishing Bird Cages – Vintage!
Recently I had a magician reach out to me to let me know there were some vanishing bird cages in a magician’s estate. I didn’t have much information to on as to what one of the cages was.
Obviously one of them is a Milson Worth Silver Meteor vanishing bird cage. This one is cool, because I’ve owned dozens of Milson Worth cage, but never had the instructions, until now!
Now for the interesting cage, the one that’s not clear as to who made it. There wasn’t a lot of information that I could pull from the pictures, so I totally took a gamble when buying it.
Here’s the cage:
It looks a lot like my Owen Magic vanishing bird cage, so here they are side by side:
The dimensions are exactly the same. There are a couple of small differences. The cage I just got isn’t stamped “OWEN” where the cage on the left that’s 100% and Owen is stamped. The lack of a stamp doesn’t mean that it’s not an Owen, as there was a period decades ago were many weren’t stamped. The Owen cage that I already has was much more modern.
Another difference between the two cages are the corner pieces.
The modern Owen cage on the right appears to have the ends peened, where the mystery cage looks like they’re peened and a blob of solder is added. I was chatting with a friend of mine and he found an old Owen Magic Supreme catalog and the ends of the corner bars also have the solder blobs!
This catalog is from the 80’s and back then the Challenge Cage Mystery was $97.50!!!
After asking around a bit, I got this little bit of information:
The size of the rails match those dimensions.
Based on all of this, I’m now 99% confident to call this birdcage and Owen Challenge Cage Mystery!
One problem is that one of the corners needs a repair, it’s missing the solder blob.
I’m sending this out to my birdcage guy and he’s going to repair it and polish up the cage!
-Louie
PS: if you come across a vanishing bird cage, feel free to reach to me to see if I’m interested in buying it!
Using the Camera Cover
Yesterday I posted about my simple camera shutter that I use to keep my camera from having TVs or projectors time out due to no signal when it’s not in use. In the video below you can see the projector in use at a comedy club gig:
@louiefoxx 68 minute magic show in 103 seconds! #comedymagic #magicshow #oklahomacity #OK #comedyclub #magician #bricktown @bricktowncomedyclub ♬ original sound – Louie Foxx
All of the sound/tech people on the little tour of comedy clubs I just did were amazed at how simple of a solution the little 3d printed cover was!
I feel like I should mentioned that both times I’ve flown with the iphone with the camera cover in my backpack, TSA took it out for additional screening. I guess it looks strange on the Xray.
-Louie
Simple but Ugly
In using projection at my shows over the summer I learned that some projectors or TV’s will “time out” and turn off if they don’t think they’re getting a signal. The camera I use has a black out option that I used to use, until I learned that the black out can be interpreted as no signal and the TV or projector will go into sleep mode.
To solve this problem, I 3d printed a simple camera cover for my iphone and glued it on.
This is a very simple, low tech way to solve the problem. The camera is still sending a picture to the screen, so it won’t got into sleep mode.
For these shows I didn’t want to run the camera through my laptop and use my Media Star to control it. That’s way too much set up and gear for a library show.
-Louie
Cheap Bicycle Playing Cards!
About a month ago I was told that Walmart had bricks of bicycle cards for $14! It turns out these are a clearance item, so once they’re gone, they’re gone. I’ve been buying them up whenever I find them on my travels.
There are still some out there at Walmart’s, but I’m finding them less and less now. If you go looking, they usually be with the playing cards OR in the clearance section of the store.
Just a note, if you’re going out looking for them. I found a box that was still labeled at $29, but I took it to the register and when I scanned it, it came up at $14. So if you see the higher price, it should ring up at $14!
Good luck finding them!
-Louie