Working on a Snake Basket…

For decades, I’ve wanted to do a snake basket that combined the two popular versions from the late 1990s. Those two were Terry Lunceford’s Viper and Collector’s Workshop’s Khyber Kobra. I wrote a blog post about those two a few months ago, which includes videos of them; you can read it here. In a nutshell, I wanted to combine the two of them, so there’s the byplay of the Khyber Kobra with the ending of the Viper.

I’ve been working on learning to use Arduino and over the summer I made a working model on an Arduino simulator, but haven’t had time to actually make it, until a few days ago.

snake basket magic trick

The arrangement above has a lot of wires, but it works! All of the functions do their thing. Like any project, once it becomes a physical thing, it will change. I realized I could eliminate one motor and have one servo handle two tasks. The motor would make the snake rise, then the servo would make it move back and forth. I decided to eliminate the motor and have the servo make the snake rise and shake. That simplified this a lot, and here’s the new wiring:

snake basket magic trick

Usually, simpler is better; here’s less to go wrong, and it’s easier to diagnose if something does go wrong.

The next step will be to move it from an Arduino UNO board to an ESP32 board and put everything onto a PCB board for more sturdy final version of this.

-Louie

Does Flash Paper Go Bad?

Recently, I bought an old box of magic props from the late 1950s/early 1960s, and it contained some 65ish year old flash paper. People frequently ask in magic social media groups, “Does flash paper go bad?” Well, let’s find out!

I’m amazed that it worked as well as it did and that it didn’t burn my fingers!

I think the issue that people have with flash paper is that they store it wet for safety, which is absolutely what you should do. Then dry out what you need to use a few days before you need it. That said, I think the paper sitting wet in a sealed bag over time will deteriorate. That takes years, and you really should be buying decades worth of flash paper at one time. It’s something you really should be buying a few months supply at a time. I personally wouldn’t want to store a ton of it at home.

Be safe.

-Louie

Unforeseen Challenge!

6 7

Right now I’m writing a show that I’ll be doing for a elementary school assembly tour in April. One of the challenges is that I’m trying to avoid the whole 6 7 thing.

That makes counting tricks a challenge and there’s a card across type trick that I’ve written into the show. I don’t want to lose control halfway counting a packet of cards, and that needs to be done four times!

Right now is that my plan it to talk about the objects as I’m counting them. That would break up the 6 to 7 with dialogue between them. I’m not sure if that will work, but it’s an idea. Another idea is to use 9 items instead of the traditional 10. Then if three items move from one packet to the other, that will reduce the counting that will have the numbers 6 and 7 from four times to three times.

Another option would be to not have the trick about counting, but about specific items moving from pile to pile. So three red backed cards end up in a blue backed packet.

I’m not sure how this will play out…

-Louie

Happy New Year (yesterday)!

Today I’m reflecting on 2025 and it looks like I did 204 contracts last year! Some of those are were multiple show/day contracts, but that’s the easiest metric I have for that. I spent just over a month on the ocean performing on cruise ships and we bought a house.

Last year my new year’s resolution was to read more, and scroll less on my phone. I did that…but I can still be better about that. I have a feeling that “read more” is going to be a perpetual new year’s resolution for me.

Here’s what I’m hoping to do this year:

  • Read more.
  • Learn Arduino, and build a couple projects I’ve wanted to do forever.
  • Add more production (video elements) to my show.
  • Learn Go Button for audio and transition to that from show cues.
  • Put out 3 products for magicians/performers.
  • write better transitions for my show

That’s not a lot, and nothing it too ambitious. The big one is still going to be reading more.

-Louie

The Moisture Festival Podcast – Vanessa Vortex

On this episode we welcome hula hoop specialist and circus organizer Vanessa Vortex. We learn about growing up on Broadway in New York and how she rebelled against her Show Biz parents by going to college.

We learn about her journey across the country, how she got involved in circus and what led her to be one of the co-founders of the Bellingham Circus Guild. A fantastic conversation with an amazing person to have in our community. 

New Year’s Eve Gigs

It’s new year’s eve, and I’m at home! I’ve been on the road a lot this year and decided to not seek out work for tonight. Most new year’s eve gigs are train wrecks, and I try limit the ones that I do to ones that are First Night Festivals, or things where I’ll be done by about 10pm. I want to be home or at the hotel before the event turns into a drunk fest and before all the people who were drinking are on the road.

That said, when I was younger, doing new year’s eve gigs used to be a nice part of my income. It was one last good paycheck for the year. Then new year’s eve for me transitioned to doing alcohol free events around the country. For me this was an excuse to travel on someone else’s dime. And that brings us to now, where I’m happy to stay at home!

There’s nothing wrong with going out there and getting the money.

To everyone out there working tonight, have fun, be safe and get paid!

-Louie

Evolution of a Joke

I had an idea for a joke about Houdini. The line I thought of was:
Once it took Houdini 8 hours to escape a jail cell, a could lawyer could have done it in two.
I wanted to make it as a cartoon, so I put some basic prompts into AI to make the basic picture:

Then I had AI add the caption:

houdini joke

For some reason it had a cropping issue at the top. Once I saw it, I didn’t like the lawyer, he didn’t need to be in the picture, so I had him taken out.

houdini joke

Looking at the picture above, I decided it didn’t need the word “once,” so I had it removed. Now it’s a nice, tight joke with a setup and a punchline, and the image doesn’t distract or give away the punchline.

I also rewrote the punchline, so there are two versions:

I’m not sure which I like better. I think the one on the right, as it’s tighter. The one on the left really takes the audience to the punchline, while the one on the right makes them think a little.

That’s a little insight of what goes into writing a joke.

-Louie

Venmo Prediction

There’s not much to this idea; it’s a confabulation routine where you predict a Venmo transaction. The three things predicted are a name, an amount, and an emoji.

Method wise, my first idea was to use a no force mental epic. There are a couple of things I don’t like about that. The main one is that you don’t have much room to write. Also, the prop doesn’t look like something that I would use in my show.

When you think about it, you just need to force the three things. Ideally this would be a routine that could be done onstage, alone, without a spectator. That leads to a simple method, the Three Section SvenPad Picasso. This is a forcing pad that’s cut into three sections.

For the routine, I’m thinking it starts by tossing a paper ball into the audience. That person selects a name. It’s tossed to a second person who chooses an amount, and finally, a third person who picks an emoji. All of those selections are them saying stop as you riffle through a section of the pad. The paper ball is tossed back to the stage, and it’s opened to reveal all of the information

This is a packs small, plays big routine!

-Louie

Vanishing Bottle Routines

Yesterday, I posted a little routine for the latex vanishing bottle prop. If you haven’t read it, you can read it here and do that before you read this as what follows will make more sense. Here are some ideas for yesterday’s routine:

  • Use two bags instead of one so that the item travels across the stage.
  • Say they’ll change places, the spin the bag 180 degrees.
  • If using two bags, one could be labelled “full” and the other “empty”. You then turn the bags around, and they have the other word on the back.
  • To add a layer, to make the method harder to back track, you could start with a variety of drinks that are different colors and force the latex bottle.

There you go, a few ideas to expand the routine.

-Louie

Vanishing Beer Bottle Routine Idea

This morning, I was thinking about uses for the latex vanishing bottles. Here’s one of the routines that I thought of:

Effect: You put a full beer bottle and an empty glass into a paper bag. A snap of the fingers and you remove an empty beer bottle and then a full glass of beer!

Method: You need a bag, a latex beer bottle, a matching real beer bottle, a glass full of beer, and a fake bottomless glass. This fake bottomless glass is basically a thin plastic tube. In the old days of magic, they would call it something like a “celluloid fake”.

Set Up: Place the empty beer bottle and the full glass inside the bag on your table.

Working: Show the empty glass (plastic tube) and put it into the full glass that’s inside the bag. Next, you show the full bottle (latex) and put it into the bag.

Snap your fingers, then remove the full glass (with the plastic tube inside), and then remove the empty beer bottle. Crumple up the bag (with the latex bottle inside) and toss it offstage.


That’s it, there’s really not much to it, but a bit more simply vanishing the bottle or making an empty one become full.

-Louie