Prop Building – Page 5 – MagicShow.Tips

Give Me Five…

The picture below is from back in 2017, I had an idea to use a foam hand for a trick.

The idea was inspired by a math based trick in a Jim Steinmeyer book. The problem I faced in the trick was giving clear instructions. I tabled the trick shortly after I started doing it in 2017. Then shortly before the pandemic hit in 2020, I reread in Gary Oulette‘s book of his columns in Genii magazine called Fulminations about the challenges David Copperfield had to get through when giving instructions for his “touch the TV screen” tricks. The instructions had to be clear, even for the biggest idiot.

Then the pandemic hit and I started playing with some tricks that used counting on a hand, and went out and remade my foam hand. I never used the foam hand in a show, because in a virtual show my hand plays big.

Right now I’m cleaning up and downsizing the props I have, and I came across the giant foam hand. It’s sort of gimmicked, or at least altered so that I can bend the fingers down and they stay down. In a couple of days I head to Arizona for a month long gig and I think I’m going to take the hand with me and try to figure out the routine.

One thing I think it lacked was an ending. It needs a good way to reveal that they are all touching the same finger. When I made the last foam hand, I also bought a foam hand that just has the pointer finger up. The challenge was how to reveal this. I was playing with it and essentially found a pull the giant hand off my hand to reveal my hand is holding a giant foam hand with just the index finger up!

Now I have a moment to punctuate the reveal of everyone on the same finger.

It’s still got a challenge. Am I going to do the trick looking at the audience or not? Traditionally in this type of trick you don’t look at the audience, however I’m not sure I want to do that. You lose a lot of control by not looking AND you can’t keep an eye on people doing the procedure.

I think I can solve this by having my instructions fixed. By “fixed” I mean something that I can’t change. It could be a recording, like in the Banana Bandana style of trick. I really don’t like performing to a recorded track, it takes away a lot of what makes a live show fun. I think I may make a flap card, that has a five on one side. You turn it over and it has a three on the back side. Then when you turn it over again, the five has changed to a one. That gives the audience something interesting during the boring counting procedure. I also think going from five to three to one, makes the counting easier as it’s getting simpler each time.

I’ll have some playing to do, but luckily I’ll have a monthlong venue to try them out!
-Louie
Click here to learn more about building your own magic props!

Spark of Invention…

This week I’m performing in Minot, North Dakota. I’ve worked out here many times over the years. When getting into town, I drove by a Menards hardware store.

Normally this isn’t a huge deal, but this is the hardware store where I bought all the stuff to create my Evaporation trick! It’s also the store where I bought a lot of the parts for all the previous unsuccessful versions of the trick.

Many magicians think that finished ideas just pop out of people’s heads, and while that does happen, it’s rarely the case. Usually it’s a idea, that eventually after a lot of work gets to the final idea.

The key is to trying to create a new method for a trick is to not give up. I tired many, many bad (in retrospect) ideas for how to make the trick bottle. However each bad idea taught me something, and they all moved me closer and closer to the final goal!

-Louie
Click here to learn more about building your own magic props!

Customize Your Props…

One thing I’ve written about a lot on this blog is that right now it’s easier than it’s ever been to get props exactly how you want them. You can 3d print things, custom diecut with a cricut machine, or follow a tutorial for just about anything on youtube.

For my polaroid trick I need an envelope that’s about the size of a postcard. Unfortunately I haven’t been able to find one at a store, and going a bit low tech, I simply sketched on and cut it out.

I’ve finally worn that envelope out and made a new more formal template to cut them out with.

I do feel kinda funny cutting small envelopes out of a larger one! However I am a big fan of getting props that are what I want, not sorta what I want.

-Louie
Click here for more information about learning to build your own magic props.

Torn & Restored…

In yesterday’s blog post, I wrote about a torn and restored card I was playing with based on a method by Harry Anderson. I think Harry’s method is really clever, and his full routine takes the trick from a simple torn and restored card to an amazing finish!

Here’s me trying out my version for some magicians the other night:

What’s neat about the tweak I made to the Anderson version is that you are actually tearing up their card, but the restored card you give back is the original card! It would make a fun magic dealers ad:

No Duplicate Names
No Double Writing
You Actually Tear Up Their Card
The Card Can Be Given Away
Self Contained Gimmicked Card
No Latex Flaps
No Elastic
No Invisible Thread

I’m having a lot of fun with this torn and restored card. I wonder how it will play once we get back to live, in person shows.

-Louie
Click here to learn more about building your own magic props!

Prop Making…

This week I’m MCing a virtual event, well really just doing introductions for bands at an event. It’s three bands, and all I really need to do is read the words that the event producer gave me, however I want to add a little something. One of the things that I want to do is make a corndog appear and disappear. As far as I know, no one makes a vanishing corn dog.

I started out to fabricate a corn dog. The first step is to make a silicone mold of a corn dog. The first surprise was that a corndog floated in the silicone, so I had to hold it down with some toothpicks. Once the silicone mold had cured, I pulled out the real corndog and used urethane to make the fake corndog.

I added some pigment to the urethane, the color, isn’t exactly right, but I’m going to give it a little bit of paint and I’ll be good to go. I only need this for one show, so the paint doesn’t need to last.

I’m excited to do record this! We’ll see how it turns out!

-Louie
Click here for more information about learning to build your own magic props.

Custom Props…

The more you do magic, the less “off the rack” magic props you will use. The more you use props professionally, the more you figure out exactly how you’d like them to feel, handle, or whatever. Sometimes this means using custom made props, sometimes this will mean using props that are altered. Recently while travelling … Continue reading “Custom Props…”

The more you do magic, the less “off the rack” magic props you will use. The more you use props professionally, the more you figure out exactly how you’d like them to feel, handle, or whatever. Sometimes this means using custom made props, sometimes this will mean using props that are altered.

Recently while travelling the TSA screened my checked baggage and lost my two table tops. After two weeks of phone calls I managed to find track them down at an airport lost and found at McCarren Airport in Las Vegas. They are sending them to me via overnight FedEx at my cost! It’s crazy, that they were in the TSA’s control, and I need to file an claim to get reimbursed shipping to me.

The worst case scenario was that the tables were gone and I had to get them remade. This scenario where I’m out a few bucks to get them back is still cheaper than having to have them remade. Also it gets them to me quicker, I don’t have to wait while someone remakes them.
-Louie
Click here to learn more about building your own magic props!

Magic Prop Problems…

There are many magic props that are a pain to use. Mostly because of either they wear our or need to be maintained. For example, you may have a prop that has a flimsy hinge or a string that rubs against something. Those are things that you need to keep an eye on. On thing … Continue reading “Magic Prop Problems…”

There are many magic props that are a pain to use. Mostly because of either they wear our or need to be maintained. For example, you may have a prop that has a flimsy hinge or a string that rubs against something. Those are things that you need to keep an eye on.

On thing that I use in my show is a remote control to run my audio. I’ve heard stories of people breaking the belt clip on it. While not a huge deal, it’s a pain the butt to not have one while you are waiting for a replacement to arrive, or trying to figure out how to make a makeshift belt clip.

I was working on another prop and had some leftover silicone, so I made a mold of the remote control’s belt clip and made a couple belt clips.

These fit perfectly onto the remote control. The are going to live in the bottom of my audio case for when I need them, or am working with with someone cool who might need one.

-Louie
Click here to learn more about building your own magic props!

Finding the Right Gaff…

In my hotel room last night I made a ton of color changing card gaffs. I made them with latex and with elastic. I made them flip vertically and horizontally. Here’s what I learned, I prefer using the ones with the seam the goes across the length of the card. I also prefer them to … Continue reading “Finding the Right Gaff…”

How to make gimmicked cards for magic tricks

I think trying a lot of different ways to make the gimmick will let you know for sure which is right for you. Sometimes what’s available to buy isn’t quite right for what you are doing. For example my hands prefer the gimmick to be latex and with the flap’s seam going across the short sideof the card. However how the gimmick is used an elastic thread gimmick with the seam running the long way visually looks better.

It’s important to know why you use a gimmick over another one or variation of it. If I stuck to what feels good in my hand, what actually looks better to the audience would be lost. In theory, it’s all for the audience!

-Louie
Click here to learn more about building your own magic props!

Gaffed Cards…

One of the things that I want to play with this summer are gaffed cards. More specifically, I want to use flap cards to do some changes. I’ve got a few ideas for what I want to do with the flap cards. Ideally I want to put together a close up set that’s 5 mins that can be projected onto a screen.

This is one of the places where a flap card will shine, because people can’t reach for the cards, and it allows you to more easily ditch things. The formal close up allows you to do some fun magic that’s highly visual…and doesn’t require a lot of space in the luggage.

Last night I was playing with more traditional “dental dam” flaps. They work great, however they have seams in them that the more modern “Hondo” style flap cards don’t have. Hondo has really solved a lot of problems with the dental dam flap cards. However, the Hondo flap cards do have their own disadvantage, and that’s that you can potentially see the elastic as it’s on the outside of the card.

All in all, I think both gimmicks have a place where one is better than the other. Now to figure out what I want to do in my card set….

-Louie
Click here to learn more about building your own magic props!

Custom Props…

One of the things I’ve been doing over the last few years is getting rid of props that I don’t like, and replacing them with custom versions that are made how I want them. I’m sure you have something that you use, that just not quite right for how you handle it. Maybe you’d like the prop an inch longer, two pounds lighter, or whatever.

Having a 3D printer has made doing a lot of this very easy. I can print something, and if it’s not perfect I can easily tweak the design and reprint it. For example, I 3D printed all the props for my bubble act.

There are a few things that I can’t easily do at home. One of the things is my table top. I love it for when I’m actually working on the table top, but not for stage show where basically just holds props. For my stage show the table top is about an inch too short and I don’t like how everything sits. I just ordered a new custom size table top from Viking Magic:

I got a nice bonus with the table top, besides being the size I want for my stage show, it’s also about a pound and a half lighter than my other table top! That means I can pack a little bit more in my case when I fly.

TLDR: Have props you like!

-Louie
Click here to learn more about building your own magic props!