Audio Ape – Belt Clip

Way back in January of 2020 I made a 3D design for a replacement clip for my Audio Ape remote control and posted a picture of it on Facebook.

audio ape remote control replacement belt clip

Recently this post has had a second life with people asking me if they can get the .stl file. I’ve offered it for a few bucks and what’s funny is everyone expects it for free.

Why would I give them my work for free?

It’s literally a piece of my life that I spent to create this. There’s a cost associated with it AND there’s a reason why they don’t just make their own. It’s either they’re too lazy to do it, or they don’t know how and are too lazy to learn how to use 3d modelling software. Either way, their being lazy doesn’t entitle them to my time with no benefit to me. Also, I should mention that these are the same people who complain about being asked to do free shows!

I did just print out a few of them for a friend of mine who I was working with an noticed he had broken his original Audio Ape belt clip and his replacement was duct tape and cardboard. I don’t mind giving my time away to my friends, but not always to strangers.

If you need a replacement belt clip for your Audio Ape you can order a four pack of them for $20 from me at: https://www.magicshow.tips/audio-ape-replacement-belt-clip-4-pack/


-Louie

Audio Ape Belt Clip

Way back in January of 2020 I made a 3D design for a replacement clip for my Audio Ape remote control and posted a picture of it on Facebook.

audio ape remote control replacement belt clip

Recently this post has had a second life with people asking me if they can get the .stl file. I’ve offered it for a few bucks and what’s funny is everyone expects it for free.

Why would I give them my work for free?

It’s literally a piece of my life that I spent to create this. There’s a cost associated with it AND there’s a reason why they don’t just make their own. It’s either they’re too lazy to do it, or they don’t know how and are too lazy to learn how to use 3d modelling software. Either way, their being lazy doesn’t entitle them to my time with no benefit to me. Also, I should mention that these are the same people who complain about being asked to do free shows!

I did just print out a few of them for a friend of mine who I was working with an noticed he had broken his original Audio Ape belt clip and his replacement was duct tape and cardboard.

If you need a replacement belt clip for your Audio Ape, you can get them at:
https://www.magicshow.tips/audio-ape-replacement-belt-clip-4-pack/

Louie

Adding an Ankle Switch…

Currently I’m using Audio Ape to run the music to my show. I really don’t care that people know or are aware that I’m using a remove control, versus a sound guy running the music. I keep the remote on my belt and push it as needed. Pretty simple. Lately I’ve been thinking about adding … Continue reading “Adding an Ankle Switch…”

Currently I’m using Audio Ape to run the music to my show. I really don’t care that people know or are aware that I’m using a remove control, versus a sound guy running the music. I keep the remote on my belt and push it as needed. Pretty simple.

Lately I’ve been thinking about adding a ankle switch to one of my remotes (I have two). Essentially what this will do is allow me to play music without having to push a button with my hands. For me there are a couple of moments where I want a sound cue, but my hands are full and hitting the cue can be a bit awkward.


Yesterday I added an ankle switch to both of my Audio Ape remote controls. It was super easy to do, especially after I found this tutorial:

One of my worries about altering a remote to run off an ankle switch was that I would no longer function as a remote and that I’d need a magnet to run that button. I was surprised to learn that the remote functions normally as well as functions when run with a magnet!

Travelling…

Newer performers frequently ask me about how I travel with my show on an airplane. People are worried about lost luggage. Unfortunately the only thing you can really do about that is to either carry everything on, or accept that can happen. I guess there’s a third option and that is having a show where … Continue reading “Travelling…”

Newer performers frequently ask me about how I travel with my show on an airplane. People are worried about lost luggage. Unfortunately the only thing you can really do about that is to either carry everything on, or accept that can happen. I guess there’s a third option and that is having a show where you can find all of your props in your destination city. Then there’s combinations of the three.


Unfortunately for my show, I can’t do it all in my carry on. Some of the items I use can’t be taken in the cabin of the plane and can’t be sourced locally, so I’m stuck checking at least some of my show. Since I have to check a bunch of stuff already, I check almost everything.


Currently here’s what I carry onto the plane in my backpack:

The white tube has my vanishing birdcage. If that wasn’t so easy to break by someone who examining it, I’d check it. In the zipper compartment is my cage pull, a thumb tip, mismade bills and a thumb drive with everything the people running the theater would need (cue sheets, video, music, intro, etc). Then in the yellow case is my audio gear (mics, mic packs, audio ape, etc). Everything else in the backpack is my personal stuff, so books, my laptop, etc.


I’ve had my luggage “lost” by the airline once, and they had it delivered to me within six hours. I also have had TSA screen my bags and forget to put a couple of things back into it, luckily after weeks of phone calls I tracked down my props!


What do I do if my luggage gets lost?


I’m lucky that I can do a lot with simple stuff and in the past I’ve done a lot of standard magic, so I can source a show locally. It’s not the ideal situation, however I can go to the Walmart in any city and pick up a two deck of cards, rope, scissors, yarn, pad of paper, duct tape, a couple of handkerchiefs and some markers and I’m good to go. This isn’t the show that I want to present, but I can do a decent show with that.


Magic Prop Problems…

There are many magic props that are a pain to use. Mostly because of either they wear our or need to be maintained. For example, you may have a prop that has a flimsy hinge or a string that rubs against something. Those are things that you need to keep an eye on. On thing … Continue reading “Magic Prop Problems…”

There are many magic props that are a pain to use. Mostly because of either they wear our or need to be maintained. For example, you may have a prop that has a flimsy hinge or a string that rubs against something. Those are things that you need to keep an eye on.


On thing that I use in my show is a remote control to run my audio. I’ve heard stories of people breaking the belt clip on it. While not a huge deal, it’s a pain the butt to not have one while you are waiting for a replacement to arrive, or trying to figure out how to make a makeshift belt clip.

I was working on another prop and had some leftover silicone, so I made a mold of the remote control’s belt clip and made a couple belt clips.

Audio Ape remote control belt clip

These fit perfectly onto the remote control. The are going to live in the bottom of my audio case for when I need them, or am working with with someone cool who might need one.

Listening To My Own Advice…

One thing I love doing is watching other acts and thinking of ways that they can improve. If they are friends of mine and open to it, I’ll share my notes with them. Recently I watched a friends show and they are controlling their music with a smart watch. One of my notes was to … Continue reading “Listening To My Own Advice…”

One thing I love doing is watching other acts and thinking of ways that they can improve. If they are friends of mine and open to it, I’ll share my notes with them. Recently I watched a friends show and they are controlling their music with a smart watch. One of my notes was to get an actual remote, not your watch to run your music.


Using a smart watch to control you music looks bad. It looks like you are constantly looking at the time. Also to use it as a music controller, you need to look at the face of it, you can’t really find the button locations by feel. With a remote like the iJet or Audio Ape you can feel the buttons and use them without looking.


Yesterday I was out doing my flea circus and decided to run it off my apple watch. My reasoning was to simplify a set up and to give it its own dedicated audio set up. This was also the first time I’ve used the apple watch to control music in a live show. It’s clunky as heck when you have to look a the watch and then hit the button.


If you were to use an apple watch, a better system would be to mount it somewhere and push it. Wearing it on your wrist ties up your hands and eyes. It’s easier to glace at your table than it is to glance at your wrist. My advice is to get a remote control unit with buttons you can feel.