Normally I don’t produce shows, it’s a pain to deal with many acts that aren’t full time pros (and some full time pros as well). During the current “shelter in place” I’m co-producing a variety show that takes place over zoom. There are a lot of approaches to these streaming shows. Our theory is to do them live, and it give it the feeling that anything can happen. Also a live show that is happening while you are watching it has a different energy for the viewer than just watching a youtube video.
Here’s highlights from our last show:
We’re going to a fun, hanging out vibe and I think we’ve gotten that. It’s not just a show it’s a hangout. If you’re doing a streaming show, what separates yours from just a camera on your show?
After watching a few virtual magic shows, I made a change to how I record part of mine. I used to have a separate close up camera for when I wanted the focus on my hands. Then it hit me, why not just use the feed from the main camera and crop it down. That was a simple solution and I think looks better than a second camera, unless the second camera was a drastically different angle, like pointing straight down.
You’ll notice in the square that I’m in, in the upper left there’s a smaller full picture of me. Doing this was simple, it’s just using the camera feed twice. The larger picture is cropped down to just my hands and the smaller is the unaltered camera frame.
I’ve always wanted people to see my face while performing and the bigger picture. In my opinion it helps connect with your audience when you are more than just hands.
I’ve been making tricks that I do is to make them more “bullet proof” on camera. One of the things that I’ve done is to use a gimmicked table to avoid going to the pocket to ditch or to steal things. This is changing how I think about a lot of close up magic.
One thing performing for the camera and not live close up is that it’s hard to get your face and table in frame at the same time. That is when you use a traditional table height, which is about weight height. You end up with either a very wide shot and it’s harder to see the action or just the tabletop and your crotch in frame.
Personally I’d rather people see my face open space on the table. In the past I’ve done a couple things, first having a smaller table top that’s slightly higher than normal helped. I also try squat down to physically get my head closer to the table. This is uncomfortable and wouldn’t want to do a whole show this way, but it helps allow me to get my face in the video.
Here’s an example from video of mine:
My daughter invented part of this trick a couple of years ago.She makes me pay a licensing fee to perform the trick!…..#magic #magictrick #cupsandballs #sleightofhand #dicetrick #nocameratricks #magician
You’ll see in the video above that the table is at about belly button level, instead of at the bottom of my crotch. What I’ve recently done is raise my table up to a couple of inches below my armpit and shrink the size of the tabletop. That makes it a lot easier to show both my face and the tabletop!
For me when I perform, I want to have my face in frame as much as possible, that’s just as important as the magic. Sure there are times when you want to focus on the trick, but for me the overwhelming majority of the time, I want my face also in frame. Keep in mind, this is for a static one camera video, when you have a moving or multiple cameras, you have more options to show your face and highlight the magic.
One of the things I’ve never really explored much was using a gimmicked table. The main reason is that it doesn’t really work in the venues that I perform in. I rarely have an audience that’s just in front of me, so the stuff hanging off the back of my table would be visible.
Yesterday I 3d printed a dice holder and it worked great. This was to avoid loading from my pocket. Then it got me thinking that I should remove the “two in the hand, one in the pocket” sequence from the routine so that I don’t got to the pocket at all. That would make the routine more deceptive, so I made a servante to ditch the dice into:
I was playing with a new routine and I’m liking it. I’ve come up with an interesting ditch of the one of the dice, that’s built upon something that I saw Tom Stone do at a lecture. It’s a way to get rid of one of the dice without having to put my hand on the table’s edge. It was part of his talk on “crossing the gaze” and something that’s stuck with me for years.
The new routine is starting to figure itself out, but it’ll be a bit before the sequence starts to get finalized. I’m happy I finally built this.
I’m excited that my table dice holder that I was 3d printing yesterday turned out and works great! It’s for the final two dice production of my Cee-lo cup and dice routine. Here’s the finished holder:
The holder has a notch in the bottom for my finger to contact the bottom of the dice and then to lift straight up to load them into the cup. Here’s this loading procedure in a test video:
This is way better than loading from the pocket for video! I’m glad I spent the time to make it and wasn’t okay with doing it the way I’ve always done it.
One of the tricks I’m adding to my virtual magic shows is Cee-Lo which is my cups and dice routine. One of problems going from an in person show a virtual show is that you can’t move the audience’s focus around as easily. At one point in the routine I need to load the cup and doing it in the room with people there is super easy, however it’s much harder with the focused eye of the camera.
Normally I would load this from my pocket, however that won’t work for the reason above. What I’m going to do is load from the table. I designed a holder for the dice and they will slide up into the cup from behind the table’s edge.
This holder is currently printing out and I’ll try it out later today. This is something that I normally couldn’t use in my live shows because I perform in conditions where people can frequently see behind my table. This is one of the interesting things about working on a virtual show, I can use techniques that don’t work for my in person show.
Yesterday I wrote about using “fishing techniques” on streaming magic shows, you can read the post here. Today I’m going to deal with a specific trick. Let’s not forget that I think that if you are doing a trick where you are asking questions to figure out what someone is thinking of, you need to have something physical as your prediction. That makes it harder to back track and figure out the method of the trick.
Okay, let’s get to the trick. I just got mine in the mail a couple of days ago and have done it a few times already and it’s playing great. The trick is John Kennedy’s Mind Power Deck!
If you aren’t familiar with this deck, you can show it to be normal, have someone memorize a card and with asking just a few questions you can tell them the card they are thinking of. It’s great! The trick has a built in cheat sheet, but I simply printed out a flow chart and taped it to the wall behind my webcam. This is easier to read that the hidden in plain sight cheat sheet he gives you.
How I add a physical prediction to the trick is I have an envelope that I’m holding in my hand before the trick. The envelope ends up having the card they are thinking of in it. Having the card in the envelope makes it so that someone can’t say, “the magician just asked questions until he figured out the card“. Unfortunately that’s the logical solution that a non-magician would come up with and the correct one. Always add a physical prediction!
Every summer I try to add a trick to my show that’s something I’ve always wanted to do. Usually whatever that trick is doesn’t make it into the show long term. It does scratch the itch for doing that trick and usually there’s a reason I hadn’t done it in my show.
One of the tricks I’ve always wanted to do is the dancing handkerchief. When I was a kid I did a Sid Fleishman‘s version when I street performed. Today while driving it hit me that a virtual show is the perfect venue for the dancing handkerchief. You can easily control the lighting and the audience’s viewpoint of the trick.
I bought John Calvert’s Casper The Friendly Ghost set a couple years ago when it popped up on a used magic website. I’ve always thought this was a great routine. I remember seeing him do it, if you haven’t seen it, here it is:
I think I’m going two play around with a version of this for virtual shows this summer!
I’m fascinated by the Vanishing Birdcage trick. I remember hearing stories of Bert Allerton doing the vanishing birdcage close up at tables. The story I remember reading was that he took the sides off of his cage so that it would vanish quicker and have less bulk in his sleeve.
There have been many other people that have done the cage, and solved many problems. For example, using a Take Up Reel to allow you to do the cage later in your show.
The biggest challenge is how do you deal with the cage after the vanish (if it’s not your closer)? There are a lot of solutions ranging from using a small, flexible cage and just leaving it in your sleeve, to having a secret pocket in your pants your ditch it in.
Recently it hit me, that a virtual magic show is a great place to use the cage in the middle of the show. After the vanish you could have a title card that says “no rubber birds were hurt in this trick” or something like that. Then in the few seconds that plays, you ditch the cage. As long as you use title cards previously in your show, it won’t feel out of place.
When I perform and have tried doing the solid shell kicker, it never played how I’d like. I think there’s a disconnect between the shell game and when the solid shell is reveals, it’s a little out of left field. I was playing around with an ending as a topper to the kicker of the solid shells that I found in an old notebook of mine.
