Applause Please 2: The Encore

Applause please 2 the encore by louie foxx

The new version of Applause Please is now available at Hocus-Pocus.com! Right now there are only five units available and they have them all, so if you want one, be sure to order one now!

I don’t know when I’ll be able to get more of these made. I probably won’t have time to make any more until after the summer.



Applause Please 2 the encore

Applause Please 2: The Encore Applause Please has been a hit of Louie Foxx’s show for about a decade! After releasing it to the magic community 8 years ago, the prop has gone through many changes based on feedback from magicians who use the trick and Louie’s pleased offer Applause Please 2: The Encore!

Louie has performed it for kids, adults and everything in between at libraries, school assemblies, comedy clubs, theaters, and on cruise ships! The basic effect is you use an applause sign that lights up when you step on the foot switch throughout your show. During your show something disappears and reappears inside the lightbulb inside of the applause sign!

The Applause Sign and base have been redesigned by MagicCrafter and built in high quality wood. The remote control units have been upgrade to be completely battery powered, so you don’t need to plug it into a wall, this makes it much more versatile than the original version!

Warm Up:
You show an applause sign and light it up by stepping on a switch and the audience claps. When you look away the sign lights up on its own and the audience applauds. The applause surprises you and you look back at the sign just as it turns itself off. This comedy “look don’t see” bit is repeated until the audience is warmed up and ready for the show!

Routine 1:
An applause sign is utilized throughout your show. During your show, you pour a bottle of juice into a folded up newspaper and the liquid vanishes! You step on the foot switch to turn on the applause sign and it DOESN’T light up. When you open it up the light bulb inside is FULL of the juice that just disappeared! You twist the end off the light bulb and pour the juice out!

Routine 2:
An applause sign is utilized throughout your show. You show a handkerchief, and it changes color from Red to Yellow. You then teach the audience how the trick works and reveal that there are two handkerchiefs. You demonstrate the trick again, while “teaching” how the trick works and at the end the red handkerchief has vanished! You step on the foot switch to turn on the applause sign and it DOESN’T light up. When you open it up the light bulb inside is the missing red handkerchief!

Bonus effect 1:
An applause sign is utilized throughout your show. At some point during your show, you make a red handkerchief disappear! You step on the foot switch to turn on the applause sign and it DOESN’T light up. When you open it up the light bulb inside is the missing red handkerchief!

Bonus effect 2:
You borrow a dollar bill and have it signed, it ends up inside the lightbulb of the applause sign! You get video of a routine that Louie did for a library tour almost a decade ago. The method isn’t taught, but if you own a thumb tip, you can figure it out and is included as another example of a routine you can do where an object reappears in a lightbulb.

You get:

– Remote controlled applause sign!
– Plastic lightbulb with 2 bases (one for liquid and one for the silk routines)
– Flash drive with instructional video
– 9v battery
– Evaporation liquid vanishing trick (sports drink style bottle)
– Dye tube
– Yellow and red silks

You get everything you need to put Applause Please 2: The Encore into your show right away!

This is currently only available from Hocus-Pocus.com

-Louie

Finding the Silver Lining…

While working on the Object in Ball of Yarn, recently I 3D printed a fishing reel to reel in the yarn. Every time I used it for the first few shows I worked the reel. Yesterday I decided to let a kid reel in the reel. Guess what happened? Within two cranks, the kid snapped … Continue reading “Finding the Silver Lining…”

While working on the Object in Ball of Yarn, recently I 3D printed a fishing reel to reel in the yarn. Every time I used it for the first few shows I worked the reel. Yesterday I decided to let a kid reel in the reel. Guess what happened? Within two cranks, the kid snapped the reel off the fishing pole!


When that happened, I was bummed out, however I’m also smart enough to see the “silver lining” in the situation. When the kid broke the reel, it was funny. My thinking then shifted to, how can I make that happen every time?


This solution was pretty simple. I just epoxy’d a magnet on the pole and the reel. When someone goes to crank it, they come apart. It’s a simple , and effective solution. The bonus is that’s today’s new bit I’m working on for Day 3 of a new bit in the show every day.