Yesterday I wrote about a failed attempt at making sponge bunnies that look like Marshmallow Peeps (read about it here). I made a second attempt, and this one turned out much better. Instead of using actual Marshmallow Peeps to create the mold, I sculpted them out of clay.
![sponge marshmallow peeps magic trick](https://www.magicshow.tips/wp-content/uploads/2023/12/2023-12-13-12.56.49-768x1024.jpg)
My mold is one full size bunny and then two smaller ones. My thinking is that I can get a full set out of two castings in the mold. I can make additional molds if this is something I want to make a lot of.
![sponge marshmallow peeps magic trick](https://www.magicshow.tips/wp-content/uploads/2023/12/2023-12-13-13.24.32-768x1024.jpg)
![sponge marshmallow peeps magic trick](https://www.magicshow.tips/wp-content/uploads/2023/12/2023-12-13-13.26.56-768x1024.jpg)
![sponge marshmallow peeps magic trick](https://www.magicshow.tips/wp-content/uploads/2023/12/2023-12-13-13.27.04-768x1024.jpg)
I used foam in the mold as I already had that at home, so it was easy to make a test with.
![sponge marshmallow peeps magic trick](https://www.magicshow.tips/wp-content/uploads/2023/12/2023-12-13-14.55.54-edited-scaled.jpg)
They came out with a workable density, I think that I would like them to be a little bit softer, so I’ll have to explore some other densities of foam. The next step will be to play with adding pigment to them so that they’re yellow.
-Louie